Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. |
|||||||||||
Characteristic |
Symbol |
SD52C |
SD53C |
SD54C |
SD55C |
SD56C |
SD57C |
SD58C |
SD59C |
SD510C |
Units |
Peak Repetitive Reverse Voltage |
VRRM |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
90 |
100 |
V |
RMS Reverse Voltage |
VRMS |
14 |
21 |
28 |
35 |
42 |
49 |
56 |
63 |
70 |
V |
Maximum DC blocking voltage |
VDC |
20 |
30 |
40 |
50 |
60 |
79 |
80 |
90 |
100 |
V |
Average Rectified Output Current @ TT = 100°C |
IO |
5.0 |
A |
||||||||
Non-Repetitive Peak Forward Surge Current, 8.3mssingle half sine-wave superimposed on rated load(JEDEC Method) |
IFSM |
150 |
250 |
A |
|||||||
Forward Voltage (Note 3) |
VFM |
0.43 |
0.50 |
0.70 |
V |
||||||
Peak Reverse Current @TA = 25°C at Rated DC Blocking Voltage @TA = 100°C |
IRM |
0.5 |
mA |
||||||||
Typical Capacitance (Note 2) |
CT |
350
|
pF |
||||||||
Typical Thermal Resistance, Junction to Ambient |
RμJA |
90 |
℃/W |
||||||||
Operating Temperature Range |
Tj |
-55 to +125 |
℃ |
||||||||
Storage Temperature Range |
TSTG |
-55 to +150 |
℃ |
Notes: 1. Thermal resistance from junction to ambient,0.276×0.276〃(7.0×7.0mm)copper pads to each terminal.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
3. Short duration test pulse used to minimize self-heating effect.
Ang for product manual electronic pdf format, please make sure your computer
is equipped with corresponding reading software.
Download the name | Download |
---|---|
SD5XC Series | download |